Yes we did get stock through and we have fulfilled all our backorders (over 26 of them). The web site has been updated BUT it is summer holidays in Europe now and our manufacturer is away until the end of July when hopefully we can get orders going again, BUT another BUT, there has been difficulty sourcing the medium motors and they are supposedly arriving now at the end of August which means bicycle starter kits will be restricted until early September.
Once again, thank you for your patience as these teething problems are sorted - we know it has been many months but it will be worth it.
We have been advised that stock is starting to flow again and we should be receiving some after Easter. There are still not huge quantities but Magnorail are trying to catch up with a huge back order across the world. It is as though the spark has lit a bonfire and model railroad hobbyists have seen the power of the Magnorail MAGIC in videos and in person at exhibitions. As promised, MagnorailOz will honour all its back orders first before placing new stock on the web shop. We will be offering either the creation of a PayPal invoice or direct debit. First time overseas purchasers will be given the option by invitation of a charge free money transfer through TransferWise for their first transaction between AUD$300-500. Check them out at https://transferwise.com and see how it works
We sincerely apologise for the delay which has been completely out of our hands but it will be worth the wait to bring a little bit of magic to your layout.
This is a series of Queries and Answers from and to Anthony in the USA regarding his proposed Z scale Magnorail layout and he road surface thickness and materials to use.
When I search for A3 laminating pouches I see them with 3 mil and 5 mil thicknesses. Isn't this too thick? I thought if using photo paper you don't want it more than .4 mils.
I tried printing out some samples of road patterns from the site in N scale size and only get something so small you can't really see what the pattern is. Maybe I need to play with my printer adjustments. I have seen some fairly thin laser cut cardstock roads that may work though I am concerned a little about their thickness. I believe they are all under 1mm thick.
If you are laminating, the paper can be 80gsm or standard copy paper. The laminating process automatically enhances the photo or artwork.
I am sure you can find laminating pouches which are thinner as well as photo paper which is more light weight. Some pouches are heavier gauge as they want the finished product to be more robust for menus or placemats.
If you go to https://www.globalplasticsheeting.com/mil-thickness-compared-to-mm-millimeter-and-inches you will see that US mil is totally different to international metric millimetres - so it is all in the translation - so you should be looking at about 1mil if you can get it. We also classify our pouches in microns and 80 microns is the standard laminate thickness here.
I would suggest going to Staples or Office Depot and see if they have any off cuts from their laminating service area and check them in a micrometer so you know exactly the thickness you need.
As you are you using z or N scale? The vehicles are lighter and the magnetism factor is enhanced I would assume and road bed thickness may not be as critical as you are moving lighter vehicles.
A bit of trial and error, but I have found the Matt laminating surface to be reliable and also cleanable as slider residue can build up.
The original suggestions for using photopaper recommended spraying with a matte medium after painting or coloring it. Does the friction from the sliders wear it away over time? does it need to be refreshed? I'm not sure yet which surface option I will go with but if I wanted to use the photo paper or a thin cardstock I want to make sure it doesn't get ruined in short time.
After 30 hours of continuous action at exhibitions, I generally get a soft cloth and some multi purpose cleaner and give the track a good rub down. This generally gets rid of any residue from the sliders plus all the dust and muck that accumulates from being in a dusty public place - just like trains, you need to maintain the track, so you want the roadbed to be reasonably durable which I have found my laminating option to work well.
As you were talking about Z scale, I would suggest that any vehicles you have will be extremely light and you may get away with attaching magnets directly to the body of the vehicle.
I have done this with the John Deere lawn mower you will see in some of my latest videos. I actually drilled out a small cavity so the magnets sit up in the body so that when placed on the track, they do not actually make contact but the magnets are strong enough to attract the the track magnets and get pulled along.
With Z scale you should be able to get away with possibly even the pin head size magnets that came with your sliders and would normally be stuck on the sliders.
I then stick a small piece of velour (comes in rolls with self adhesive back - craft shops or hardware stores should have it) and is used on ornament bases to stop them scratching bench tops.
This has to be attached with the pile going the correct way so that it is smooth when the vehicle goes forward and reduces friction. Doing it this way means that your vehicle is running on its wheels but still being pulled along and if the bottom does touch the road surface, the velour should not mark the roadbed as easily whilst not impeding the movement.
Hope this helps - try some experimenting. Remember if you use superglue and need to remove a magnet that might have flipped and reversed the polarity, you cause nail polish remover with acetone in it which frees the glue but be careful that you don’t melt your vehicle in the process if it is a light plastic.
Thank you for your patience - it has been a steep learning curve for the new owners and they have tried to overcome some shortages, especially in the supply of motors which have been slow in getting manufactured. An email today says that the motors are due by early April and boxed sets will once again be able to be produced.
The pent up demand has been huge worldwide, with their initial manufacturing order double of the purchases during 2018, yet the first order delivered will only cover backorders so a new manufacturers order is well under way.
So you should see Starter Sets appearing on web sites in the latter part of April.
Regrettably when stock does arrive there will be price rises on most of MagnorailOz items, mainly due to the poor standing of the Aussie dollar against the Euro and the US$. (Obviously that is good news if you are in the USA) This tied in with an increase in the wholesale prices and substantially dearer freight from France than the Netherlands which we cannot afford to absorb.
Even so, the MAGIC of the Magnorail system is a lot cheaper than having to run a fleet of non digital Faller Cars that zip around at unrealistic speeds.
You will also have noticed that you can no longer buy the individual bicycles in kit form, so you will now be receiving hand assembled and painted bicycles across the range. This does exclude the bicycle starter set, which still comes with a male and female cyclist that require assembly and painting.
If you are all thumbs (and there are very small parts in the assembly) Would recommend buying the slider starter set and purchase ready to run bicycles. With a small train controller you can bring the fast speed motor down to an acceptable pedalling rate.
Over the next few months we will be at the following train shows :-
The 2019 Warrnambool Model Railway Exhibition will be held at St .Joseph's Primary School in Botanic Road Warrnambool. Saturday 12-1-2019 from 10 till 5, Sunday 13th from 10 till 4.
Corio Model Railway Club 46th Annual Exhibition
When:Daily from 26 January 2019 to 27 January 2019
Next on:26 January 2019, 10:00 AM - 05:00 PM
View other upcoming dates and times
27 January 2019, 10:00 AM - 04:00 PM
Where:South Barwon Civic Centre
Reynolds Road, Belmont.
Facilities:Catering and/or dining
(Bread rolls, soft drinks, ice creams, sweets available for purchase in the hall.)
ARARAT MODEL TRAIN SHOW
We will be at The 2019 Warrnambool Model Railway Exhibition this weekend, which will be held at St .Joseph's Primary School in Botanic Road Warrnambool. Saturday 12-1-2019 from 10 till 5, Sunday 13th from 10 till 4.
Next exhibition is the Geelong
Jose Munoz was asking about O scale models on the Magnorail System - I replied on my YouTube Channel klatchco56 in the following way.
Magnorail is scale agnostic - in other words the vehicles on top can be from z scale to HO. As to O scale, I would imagine that the vehicles would have to be reasonably light and freewheeling and would need a stronger magnet on the slider. Regrettably the bicycles are only available in HO scale. I will try an O scale vehicle to test out the theory - watch my blog on my website at www.magnorailoz.com.au or subscribe to this channel
Basically boats and canoes etc are easier as they actually contact the surface directly. A velour velvet on the crafts bottom will reduce friction. Once again a larger neodymium rare earth magnet should provide the “sticking” power but it is all about physics - the heavier the craft the more power and grip needed to move it. I would not recommend putting a fleet of O scale boats on the Magnorail System as it is powered by 2 x O rings gripping the track as the motor turns and too much tension by stressing the pulling power would make the system slip. However 3 or 4 canoes would probably work. I use Preisser models and adapt them with either MagnorailOz sliders or magnets in the topside of the hull of craft.
The canoes seen on the video https://youtu.be/IzE7jhDvOeU are in actual fact N scale models
Magnorail in the Netherlands have sold their business to Maketis in France. It was offered to their top three resellers as a going concern. We at MagnorailOz did our due diligence but had to decline in the end purely because of the logistics of having products manufactured in Europe then sent to Australia for assembly and packaging then sending back to Europe and the world to resellers - a nightmare for our one-man operation.
Maketis have assured us that things will be back to normal by about February depending on manufacturing operations turn around.
In the meantime MagnorailOz bought a lot of the boxed stock but that is gong fast, so check the website for current stock levels.
Hopefully by the end of February we will be back in to a full stock position, however if we are out and you want to pre-order, just drop us an email at email@example.com and we will advise you once the new stock is in.
Onwards and upwards and the MAGIC will continue despite this hiccup.
Thanks - Clyde
My back order just arrived express post from Holland - cost heaps but your support is worth it. Another order hopefully on its way soon so I should be fully stocked for the Grampian Model Railroaders Stawell Model Train Exhibition July 7 & 8. - see the attached flyer which you can download if you have a notice board in Victoria that you can pin it up. - see you then
Clyde has been involved for many years with the Magnorail system having built his own layout "Echo Lakes" featuring two concepts using the Magnorail System.